Mar 18, 2019 Recover lost data from macOS 10.13 High Sierra update failure, formatted partition, RAW hard drive and other crashed issues. Support various recoverable data types, such as recover computer emails, photos, documents, videos, emails, music, etc. “Install the latest macOS that was installed on your Mac, without upgrading to a later version” using Command (⌘)-R. “Upgrade to the latest macOS that is compatible with your Mac,” macOS High Sierra v.10.13.2, using Option-Command-R. Since the update installer would load automatically on every boot this results in a boot loop. However I figured out that I can force to boot into macOS with ALT+R which has been a temporary fix for me since then. Sorry for the lack of specificity, but I finally was able to get macOS High Sierra (10.13) installed on my Mac mini (Late 2012; 2.5 GHz Intel Core i5) with 16GB of memory and an internal disk that is a plain hard disk drive; not an SSD.

Mac fails to boot or start after the macOS update. Whatever is preventing your Mac from starting up, follow these 5 simple solutions to get it working again. If you have data loss problem after macOS update, EaseUS Data Recovery Wizard for Mac provides tried-and-true data recovery service to you.

This page covers 5 fixes for Mac won't boot or start issue after macOS Big Sur, Catalina, Sierra or older macOS update issue. If you are with this issue, follow to make your Mac computer work now:

macOS has now been updated to 11.0, and many Mac users are trying to upgrade to the newest version. While for most it's a usual pleasurable experience, for some this update had downsides. Some users complain that their Mac computers won't boot after installing new macOS Big Sur/Catalina. When Mac fails, it usually can't boot or start up properly. If you are faced with this situation, the most important thing should be recovering data from the unbootable Mac because:

• Your attempts to fix the Mac not booting issue may write new data on this Mac, which will overwrite the old data and make it irrecoverable.
• Recovering data before the complex fixes can avoid data loss.

EaseUS Mac data recovery software is able to recover data from unbootable Macs after update. It creates a bootable media that enables you to recover data from Mac hard drive (If you only have one Mac). What's more, it recovers data from failed internal Mac hard drive, APFS boot drive, and unmountable APFS boot volume, etc. If you have two Mac devices, take out the hard drive and connect it to the other Mac. Download EaseUS Data Recovery Wizard for Mac on that Mac device, and recover data from the hard drive.

Then, you can read on and Fix the 'Mac won't boot after update' issue after you have successfully got data from the drive.

1. Reset the PRAM / NVRAM

NVRAM refers to special memory sections on your Mac that store data that persists even when the Mac is shut off, such as volume settings and screen resolution. Resetting that data isn't harmful! In some cases, after performing this step, your Mac will restart normally.

• Restart your Mac
• Hold down all of these keys: 'Command', 'Option', 'P' and 'R', and turn on the Mac. (It's the same keys to reset the PRAM).
• Keep holding the keys down until you hear the Mac restart again.

You may see a progress bar on startup. If the progress bar fills up and then the Mac starts up, you're probably good to go. If not, reset SMC.

2. Reset the SMC

In some situations, you may need to reset your Mac's SMC (System Management Controller).

• Shut the Mac down.
• Unplug all cables.
• Wait for a few minutes.
• Plug the cables back in and start up the Mac.

If you've got a Mac desktop, unplug it for 15 seconds and then plug it in and after five seconds press the power button.

3. Boot Mac in Safe Mode

Safe Mode is a stripped-down version of the Mac operating system that can be useful if you are trying to troubleshoot issues with your Mac.

• Start your Mac, press and hold the 'Shift' key, and make sure your Mac has at least 9 GB of free space.
• When the login window appears to release the shift key and log in. You may be required to log in twice if you have FileVault turned on. Then restart the device.

Wait patiently till Mac computer finish the reboot process.

4. Run Disk Utility in Recovery Mode

If your Mac is booting but the operating system isn't loading up, you may have a corrupted drive. Luckily it is possible to fix this in Recovery Mode. In Recovery Mode you can restore from a Time Machine backup, use Disk Utility to verify and repair connected drives, check your internet connection, get help online using Safari, and install or reinstall macOS.

• Make sure the Mac is off. If it's stuck on a grey, blue or white screen, just hold down Mac's power button for several seconds until it shuts off.
• Hold down the 'Command' and 'R' keys, and power the Mac back up again. Keep pressing 'Cmd' + 'R' while your Mac is booting up.
• Once your Mac starts in Recovery Mode you can have access to 'Utilities'. Click 'Disk Utility', locate the icon for your Mac's drive, and click 'Verify Disk'.

Boot Failure After Macos High Sierra 10.13.2 Upgrade Guide

5. Reinstall macOS Big Sur/Catalina/Sierra

Boot Failure After Macos High Sierra 10.13.2 Upgrade Kit

The last method to fix macOS Big Sur, Catalina or Sierra fails to boot after update error is to reinstall macOS.

• You can download wanted macOS Big Sur/Catalina/Sierra and create a bootable USB drive to clean install macOS Big Sur/Catalina/Sierra on your computer again.
• You can also boot into Recovery mode (Solution 4), and then click to install the latest OS and follow the onscreen prompts. Our article on resetting a Mac to factory settings has more information on reinstalling macOS.

If your Mac does not respond after trying these tips, contact Apple Support or a certified Apple Repair Center. It’s likely there is a problem with your logic board or other internal hardware.