A600 Mics Process 2 Manual

PGX1, PGX2, PGX4

This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

The SDMO MICS Telys 2 Digital Control Panel has four operating modes that can be accessed through buttons on the display module. Those modes include automatic, manual, stop and test. The buttons are color coded blue for ease of location and operation of this product. Covid-19 patient at the Intesive care unit in #Bolzano #Italy.⁠ ⁠ The patient is there for a week now and suffering a lot. He keeps moving his arm left and right all time.⁠ ⁠ Shot on the #SonyA7rIV and #Voigtlander 40mm f/1.2.

Meets requirements of EMC standards EN 300 328, EN 300 422 Parts 1 and 2, and EN 301 489 Parts 1 and 9.

Meets essential requirements of European R&TTE Directive 99/5/EC, eligible to bear the CE mark.

PGX1, PGX2

Certified under FCC Part 74. (FCC ID: DD4PGX1A, DD4PGX2A, DD4SLX1, DD4SLX2). Certified by IC in Canada under RSS-123 and RSS-102. (IC: 616A-SLX1, 616A-SLX2).

PGX4

Approved under the Declaration of Conformity (DoC) provision of FCC Part 15. Certified in Canada by IC to RSS-123. (IC: 616A-PGX4A, 616A-PGX4B, 616A-PGX4C, 616A-PGX4D).

The CE Declaration of Conformity can be obtained from Shure Incorporated or any of its European representatives. For contact information please visit www.shure.com

The CE Declaration of Conformity can be obtained from: www.shure.com/europe/compliance

Authorized European representative:

Shure Europe GmbH

A600

Headquarters Europe, Middle East & Africa

Department: EMEA Approval

Jakob-Dieffenbacher-Str. 12

75031 Eppingen, Germany

Phone: +49-7262-92 49 0

Fax: +49-7262-92 49 11 4

Email: info@shure.de

LICENSING INFORMATION

Licensing: A ministerial license to operate this equipment may be required in certain areas. Consult your national authority for possible requirements. Changes or modifications not expressly approved by Shure Incorporated could void your authority to operate the equipment. Licensing of Shure wireless microphone equipment is the user’s responsibility, and licensability depends on the user’s classification and application, and on the selected frequency. Shure strongly urges the user to contact the appropriate telecommunications authority concerning proper licensing, and before choosing and ordering frequencies.

Information to the user

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Note: EMC conformance testing is based on the use of supplied and recommended cable types. The use of other cable types may degrade EMC performance.

Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment.

Micrometers, often called “mics”, are likely to be the most utilized precision measuring instrument in any machine shop. As they typically measure in .0001” increments (or .01mm for metric models), micrometers provide extremely accurate measurements and machinists often prefer them to other devices such as calipers.

Anatomy

Image credit: megadepot.com

As you can see in the image above, a traditional micrometer is generally composed of several different parts. Here are some important things to consider when choosing a micrometer:

  • ANVIL: Together with the spindle, the anvil is the part that will be in constantly in contact with the part and therefore the most likely to chip. For this reason, good models usually feature a carbide-tipped anvil that will allow for longer tool life.
  • FRAME: Frames come in a number of different sizes and shapes. Some shapes are designed for specific uses. The hub micrometer in the image below, for example, is designed to get into really small areas. When choosing a micrometer, always consider the type of part you are going to measure.
  • LOCK NUT: A spindle lock is handy to keep track of a measurement and also to lock the spindle for small lot gaging. Some micrometers have a lock nut (as shown), whilst others may have a locking lever. We recommend choosing the lever type as it seems to require less attention over the years and it’s easier to operate
  • SLEEVE SCALES: While all micrometers feature the main index scale on the sleeve, which measures in increments of .025”, the most accurate models also have a Vernier scale for more accurate measurements. Vernier scales measure in .0001”.
  • RATCHET SPEEDER: Many mics have a sort of slipping clutch mechanism that prevents over-tightening and aids the user to apply a constant measuring force to the spindle, helping to ensure reliable measurements. It’s not a life-changing feature, but it’s something to consider, especially important in production situations, with different operators, but one QC spec.

Digital vs analog

Newer models, the digital micrometers, have a digital display that makes it easier for you to read measurements. In terms of digital vs. an analog micrometer, there is not much difference in accuracy. Digital mics, however, offer two significant advantages: resolution and quick scale conversion.

The displays on most digital electronic micrometers, in fact, resolve to 0.00005″ and can be quickly converted from imperial to metric and vice-versa.

Mics

Since there’s not much difference between the two models, we usually recommend going with the most convenient option, which is generally the analog one.

If you are considering buying a digital mic, this is our recommendation.

Types of micrometers

As already mentioned, mics come in different sizes and shapes according to their intended use. Here are the three main types of micrometers that you will encounter when working in a machine shop:

Outside micrometers

Brown & Sharpe 599-1-31-9 Chrome Framed Outside Micrometer

The most widely used type if micrometer. It’s used to measure the distance between two external points of either round materials if you are working on a lathe, or square materials if you are working on a milling machine.

Inside micrometers

Mitutoyo 139-006 Tubular Vernier Inside Micrometer

Designed to take inside measurements, such as the ID of bushings or bearings. The most common models of inside mics look like outside mics without a frame and anvil, but other types, more similar to calipers, are also available. Unlike outside mics, the read on the sleeve increases as the sleeve expands.

Depth micrometers

Starrett 449 Vernier Depth Gauges, Micrometer Type

Depth micrometers allow for precise measurement of depth for features like holes, slots, recesses of keyways. The tool has a hardened ground and a lapped base attached to the micrometer head. Like inside mics, the measurement increases as the rod extends into the hole.

A600 Mics Process 2 Manual

What type of micrometer should you buy?

If you are just approaching the trade and thinking about where you should start investing to build your personal toolbox, we definitely recommend starting with the best 0-1’outside mic you can afford, as it’s most likely the tool that you are going to use most. Later on, you might fill in with additional micrometers, like a 0-6” set, but you’ll likely use them less often so we recommend investing more in the first one and settle on cheaper models for the add-ons.

As already mentioned above, mics vary depending on the intended use so the best advice we can give is to identify the type mic that you will be using most (outside, inside or depth) and invest in that.

Best models

OUTSIDE MICS

A600 Mics Process 2 Manual Pdf

Our favorite model.

  • Carbide anvil
  • .0001” accuracy
  • Locking Lever
  • Friction thimble
ORDER NOW
  • Carbide anvil
  • .0001” accuracy
  • Locking Lever
  • Friction thimble
ORDER NOW

A great quality mic, only third in our list due to the lock nut type.

  • Carbide anvil
  • .0001” accuracy
  • Lock Nut
  • Friction thimble
ORDER NOW

INSIDE MICS

Tubular inside mic. It comes with interchangeable rods that allow you to measure ID up to 12”.

ORDER NOW

A600 Mics Process 2 Manual Transmission

More similar to a caliper, the frame is specially designed to enable the micrometer to provide extremely accurate small internal measurements.

ORDER NOW

DEPTH MICS

Depending on the model, you can measure up to 12” in depth. It comes with a ring-type knurled lock nut, ratchet, and speeder for stability and to apply uniform pressure and make quick adjustments for precise measurements.

ORDER NOW


Mitutoyo 129-127 Depth Micrometer

Includes interchangeable 0.157″ diameter measuring rods that can be adjusted in 1″ increments for flexibility up to 4”.

ORDER NOW

This post may contain affiliate links. Please read our disclosure for more info.

A600 Mics Process 2 Manual User

Recommended Content